Vaping has gained immense popularity in the Philippines, becoming a favored alternative to traditional smoking. Among the many devices available, Kangertech products stand out for their reliability and performance. Among their offerings, the dual coil setup is particularly appreciated for enhancing flavor and vapor production. This article aims to guide you through the process of designing a dual coil for your Kangertech device, ensuring you achieve the best vaping experience.

Understanding Dual Coils

Before we dive into the design process, it’s essential to understand what dual coils are. A dual coil setup means that your atomizer contains two separate coils working in unison. This configuration allows for a greater surface area for vaporization, leading to improved flavor and denser clouds. However, it also requires a keen understanding of resistance and power management to prevent overloading your device.

Materials Needed

To design your dual coils, you will need the following materials:

• Kanthal or NiChrome wire (24 or 26 gauge is recommended)
• Wicking material (cotton or other fibers)
• Wire cutters
• Coiling tool or screwdriver
• Multimeter for resistance testing

Step-by-Step Guide

1. Measure and Cut the Wire: Start by measuring and cutting two equal lengths of wire, ideally around 6-8 inches each. This length will allow you enough material to work with.

2. Create the Coils: Using a coiling tool or a screwdriver, wrap your wire around the tool to form the coils. Aim for around 5-7 wraps for each coil to achieve an appropriate resistance level.

3. Attach the Coils: Carefully insert both coils into the deck of your Kangertech atomizer. Make sure they are positioned correctly and secure them by tightening the screws. Ensure there’s enough space between the coils to allow for adequate airflow.

4. Wick the Coils: Cut a piece of wicking material and thread it through each coil. The wick should be snug but not overly tight; this will promote optimal e-liquid absorption.

5. Test Resistance: Before firing up your new coils, use a multimeter to check the resistance. Dual coils will generally halve the resistance of a single coil, so be mindful of your device’s specifications to avoid any damage.

6. Prime and Vape: Finally, apply a few drops of e-liquid directly onto the coils and wick to prime them. Once primed, you can start vaping, gradually increasing the wattage to find your sweet spot.

Conclusion

Designing a dual coil setup for your Kangertech vape can significantly enhance your vaping experience. With improved flavor and vapor production, it’s a rewarding venture for any vaping enthusiast. As you experiment with different materials and coil configurations, remember to prioritize safety by ensuring your device is compatible with the resistance you’ve chosen. Happy vaping!