The Vandy Vape Pyro 24 RDTA is a popular choice among vaping enthusiasts for its versatility and performance. However, like all rebuildable devices, it requires occasional maintenance and rebuilding. This article provides a detailed guide on how to effectively rebuild your Pyro 24 RDTA, ensuring optimal performance and a satisfying vaping experience.

Understanding the Pyro 24 RDTA
The Pyro 24 RDTA features a unique design that allows for both dripping and tank-style vaping. With a spacious build deck and adjustable airflow, it accommodates various coil configurations. Before diving into the rebuilding process, it’s essential to familiarize yourself with the components of the device, including the tank, build deck, and airflow system.

Gathering Your Tools
Before you start rebuilding, ensure you have the right tools at hand. You will need:
– A pair of scissors
– Wire cutters
– A screwdriver (preferably Phillips head)
– A coil jig or rod
– Cotton wicking material
– Your choice of coil wire (Kanthal, stainless steel, etc.)
– A multimeter (to check for shorts)
– E-liquid for testing

Step-by-Step Rebuilding Process
1. Disassemble the RDTA: Start by carefully disassembling your Pyro 24 RDTA. Remove the tank section and take out the build deck.

2. Remove Old Coils: Use your wire cutters to snip off the old coils. Ensure that the build deck is clean and free of residue.

3. Measure and Cut Wire: Depending on your desired resistance and style of coil, measure out the wire. For beginners, a dual coil setup with 26-gauge Kanthal wire is a good start.

4. Wrap Your Coils: Use a coil jig or rod to wrap the wire around, creating coils that fit snugly into the post holes on the build deck. Aim for around 5-7 wraps per coil for optimal flavor and vapor production.

5. Install Coils: Place the coils into the deck, securing them with the screws. Ensure that there is enough space between the coils and the deck to prevent short circuits.

6. Trim Excess Wire: After securing the coils, trim any excess wire sticking out of the posts.

7. Check for Shorts: Use a multimeter to check for any shorts in your coils. It’s crucial to ensure everything is functioning correctly before applying power.

8. Wicking: Cut your cotton to size, ensuring it fits snugly in the coils without being too tight. Stuff the cotton into the coils and tuck the ends into the wicking channels, allowing for proper e-liquid absorption.

Final Assembly and Testing
Once your coils are in place and wicking material is set, reassemble your Pyro 24 RDTA. Fill the tank with e-liquid and let it sit for a few minutes to saturate the cotton. Then, test fire the coils to ensure everything is functioning as intended.

Conclusion
Rebuilding your Vandy Vape Pyro 24 RDTA can be a rewarding experience, providing you with the flexibility to customize your vaping preferences. By following the steps outlined in this guide, you’ll be well on your way to enjoying a personalized and satisfying vape. Remember, practice makes perfect, so don’t be discouraged if your first few attempts aren’t flawless. Happy vaping!